[    8.090000] gp_tp driver suspend(0)
[    8.090000] [gp_enable_clock][1198] run, clock_name=[APBDMA_A]
[    8.090000] [lcd_suspend:311]
[    8.090000] [gp_enable_clock][1198] run, clock_name=[READLTIME_ABT]
[    8.090000] [gp_enable_clock][1198] run, clock_name=[APBDMA_C]
[    8.090000]  Nand app driver suspend! 
[    8.090000] **** Suppose to disable Nand/BCH clock here!!
[    8.100000] dram save 4196 pages
[    8.100000] maxarea 0x005a0000(0x00660000)  lowmem_maxarea 0x005a0000(0x00660000)
[    8.100000] zonetbl 2  exttbl 3  dramtbl 77
[    8.100000] GPL32900 system timer init, PCLK(arm_apb)[90000000]Prescaler[89]LDR[10000]
[    8.100000]  Nand app driver resume! 
[    8.100000] clk_sys_ahb_freq[160000000]
[    8.100000] Nand MainID:0xda98
[    8.100000] Nand VendorID:0x14761590
[    8.100000] Nand MainID:0xda98
[    8.100000] Nand VendorID:0x14761590
[    8.100000] ==Scan Nand Pad OK!!==
[    8.100000] Main ID:0xda98 
[    8.100000] Vendor ID:0x14761590 
[    8.100000] nand_info.btldr_page_size: 0x800 
[    8.100000] nand_info.bthdr_page_size: 0x400 
[    8.100000] nand_info.block_size: 0x40 
[    8.100000] nand_info.bthdr_bch: 0x0 
[    8.100000] nand_info.btldr_bch: 0x3 
[    8.100000] nand_info.addr_cycle: 0x5 
[    8.100000] nand_info.NoFSSize: 0x0 
[    8.100000] nand_info.total_MB_size: 0x100 
[    8.100000] <<<<<<-----=== BootHeader Config Information! ====----->>>>> 
[    8.100000] ECC threshold bit numer: 0xd 
[    8.100000] gSTNandConfigInfo.uiAppStart: 0x2 
[    8.100000] gSTNandConfigInfo.uiAppSize: 0x100 
[    8.100000] gSTNandConfigInfo.uiAppSparePercent: 0x8 
[    8.100000] gSTNandConfigInfo.uiDataStart: 0x122 
[    8.100000] gSTNandConfigInfo.uiNoFSAreaSize: 0x0 
[    8.100000] gSTNandConfigInfo.uiBankSize: 0x200 
[    8.100000] gSTNandConfigInfo.uiBankRecSize: 0x40 
[    8.100000] gSTNandConfigInfo.uiPartitionNum: 0x0 
[    8.100000] <<<<<<-----=== Get Config Information End! ====----->>>>> 
[    8.100000] gSTNandAppHalInfo.wPageSize: 0x800  
[    8.100000] gSTNandAppHalInfo.wBlkPageNum: 0x40  
[    8.100000] gSTNandAppHalInfo.wNandBlockNum: 0x800  
[    8.100000] gSTNandAppCfgInfo.uiAppStart: 0x2  
[    8.100000] gSTNandAppCfgInfo.uiAppSize: 0x100  
[    8.100000] gSTNandAppCfgInfo.uiAppSpareStart: 0x102  
[    8.100000] gSTNandAppCfgInfo.uiAppSparePercent: 0x8  
[    8.100000] gSTNandAppCfgInfo.uiAppSpareSize: 0x20  
[    8.100000] gSTNandAppCfgInfo.uiAppSpareEnd: 0x122  
[    8.100000] ------- APP initial succeed!! --------- 
[    8.100000] [gp_enable_clock][1198] run, clock_name=[APBDMA_C]
[    8.100000] [auo_a043fl01_resume_init][283] LCD CLOCK=9000000 Hz
[    8.100000] [gp_enable_clock][1198] run, clock_name=[READLTIME_ABT]
[    8.100000] [gp_enable_clock][1198] run, clock_name=[APBDMA_A]
[    8.100000] [gp_enable_clock][1198] run, clock_name=[APBDMA_A]
[    8.100000] gp_tp driver resume(0)
[    8.110000] Restarting tasks ... done.
- server format:[    8.340000] I2S = 0x10c424
 sample rate = 48000 Hz
initializing...
InnoLogo: RTC Alarm Time Second = 0
InnoLogo: headphone = 0
IOCtrl: devmem 0x9301F038 32 0x0000037F
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo: headphone = 0
InnoLogo Result: 0
===============================
=====   Snapshot End     ======
===============================
=======================================
Reload nand unnecessary!
=======================================
=======================================
Remount system.bin
MTD block device found!
System.bin mount on /dev/mtdblock1	 
=======================================
---
+++++++++++++++++++++++++++++++++++++++++++
++ _Run_Once
+++++++++++++++++++++++++++++++++++++++++++
SB_LOCATION=NAND
SDCARD_PATH is: /vp_mnt/sd
[   11.070000] ###watchdog_init###
[   11.090000] input: gp-keys as /devices/platform/gp-keys/input/input1
[   11.550000] [SPEAKER 27]
[   11.690000] gsensor kxtf9 probe ok(need_rotate=1)
0
[   12.020000] UBI: attaching mtd3 to ubi3
[   12.020000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
[   12.030000] UBI: logical eraseblock size:    126976 bytes
[   12.030000] UBI: smallest flash I/O unit:    2048
[   12.040000] UBI: VID header offset:          2048 (aligned 2048)
[   12.050000] UBI: data offset:                4096
[   12.270000] UBI: attached mtd3 to ubi3
[   12.270000] UBI: MTD device name:            "Inno_I_Storage0"
[   12.290000] UBI: MTD device size:            16 MiB
[   12.300000] UBI: number of good PEBs:        128
[   12.310000] UBI: number of bad PEBs:         0
[   12.320000] UBI: max. allowed volumes:       128
[   12.320000] UBI: wear-leveling threshold:    4096
[   12.330000] UBI: number of internal volumes: 1
[   12.330000] UBI: number of user volumes:     1
[   12.330000] UBI: available PEBs:             0
[   12.340000] UBI: total number of reserved PEBs: 128
[   12.350000] UBI: number of PEBs reserved for bad PEB handling: 2
[   12.350000] UBI: max/mean erase counter: 2/1
[   12.360000] UBI: image sequence number: 0
[   12.360000] UBI: background thread "ubi_bgt3d" started, PID 227
UBI device number 3, total 128 LEBs (16252928 bytes, 15.5 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[   12.450000] UBIFS: recovery needed
[   12.510000] UBIFS: recovery completed
[   12.510000] UBIFS: mounted UBI device 3, volume 0, name "ubi_on_mtd3"
[   12.520000] UBIFS: file system size:   14348288 bytes (14012 KiB, 13 MiB, 113 LEBs)
[   12.530000] UBIFS: journal size:       1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
[   12.540000] UBIFS: media format:       w4/r0 (latest is w4/r0)
[   12.540000] UBIFS: default compressor: lzo
[   12.550000] UBIFS: reserved for root:  677704 bytes (661 KiB)
[   12.810000] MTD for InnoTab reaches here: end_mark_found() - 266
[   12.810000] mtdblock_open() - 331: bbt_found[1]
Bundle title mounted successfully!
/vp_mnt/if/PROFILE.SET: profile file is corrupted, remove this file...
TouchCalibrate[NAND]
[   13.370000] Open Function !!
[   13.370000] PartInfo->partNumber = 0xc,Had Partition Header!!
Get poin[   13.420000] app_dev_release enter!!
tercal values successfully!
-32876 0 32180049 121 20095 -1073478 65536
TouchCalibrate: Already calibrated.!
[   13.530000] Open Function !!
Open /dev/gsensor (2 times) fail!
Open /dev/gsensor (3 times) fail!
Open /dev/gsensor (4 times) fail!
Open /dev/gsensor (5 times) fail!
Open /dev/gsensor (6 times) fail!
Open /dev/gsenso[   14.190000] PartInfo->partNumber = 0xd,Had Partition Header!!
r (7 times) fail!
[   14.190000] [GSENSOR_DRV] Set gsensor cal data! deltaX: 53, deltaY: -42, deltaZ: -62
Get gsensorcal values successfully!
<==[   14.210000] app_dev_release enter!!
==========gsensorcal values============>
deltaX: 53   deltaY: -42  deltaZ: -62 
<============successed read nand data============>
No SD card!

Please press Enter to activate this console. ################################################################[   14.460000] Open Function !!
###############[   14.460000] PartInfo->partNumber = 0x7,Had Partition Header!!

Desktop Manager
##############################[   14.470000] app_dev_release enter!!
################[   14.470000] Open Function !!
########################[   14.480000] PartInfo->partNumber = 0xa,Had Partition Header!!
#########
Get e[   14.490000] PartInfo->partNumber = 0xb,Had Partition Header!!
nv UNIQUEKEY_FIL[   14.490000] app_dev_release enter!!
E_PATH fail! Use default: /vp_mnt/if/UniqueKey.bin
Open /vp_mnt/if/UniqueKey.bin fail! 
SystemUpgrade.c: SysUpgrade_Init() ############ READ BACK CHECKING IS ENABLED!!
SystemUpgrade.c: SysUpgrade_Init() AppHeader Info
SystemUpgrade.c: SysUpgrade_Init() ======================================
SystemUpgrade.c: SysUpgrade_Init() headerTag       = 0x50415047
SystemUpgrade.c: SysUpgrade_Init() imageVersion    = 0x98
SystemUpgrade.c: SysUpgrade_Init() headerSize      = 16384
SystemUpgrade.c[   14.540000] [SPEAKER 25]
: SysUpgrade_Ini[   14.540000] [SPEAKER 25]
t() totalAppSize    = 33554432
SystemUpgrade.c: SysUpgrade_Init() totalPartNumber = 0xf
SystemUpgrade.c: SysUpgrade_Init() checkSum        = 0x0


SystemUpgrade.c: SysUpgrade_Init() SysUpgrade_Init() success!! version1 partition is selected.
SystemUpgrade.c: SysUpgrade_Init() +++++++++++++++++++++++++++++++++++++++++++++++++++
SystemUpgrade.c: SysUpgrade_Init() own        : v7
SystemUpgrade.c: SysUpgrade_Init() loader_1   : v7
SystemUpgrade.c: SysUpgrade_Init() loader_2   : v0
SystemUpgrade.c: SysUpgrade_Init() kernel_1   : v7
SystemUpgrade.c: SysUpgrade_Init() kernel_2   : v0
SystemUpgrade.c: SysUpgrade_Init() fastboot_1 : v7
SystemUpgrade.c: SysUpgrade_Init() fastboot_2 : v0
SystemUpgrade.c: SysUpgrade_Init() system_1   : v7
SystemUpgrade.c: SysUpgrade_Init() system_2   : v0

SystemUpgrade.c: SysUpgrade_Abort() Abort!!!!!!!!!!!!!!!!!!!!!!!!!!!!
desktopManager: signalApp(7)
desktopManager: signalApp(): bundle_pid=0, title_pid=0, title_loc=-
===================Launch BUNDLE===================
vfork_system("/system/lib/vtech/_Run_Bundle")
desktopManager: detected NAND cart insert...
vfork_system("nand_mount.sh add")
key_thread: start
phonejack_thread: start
---
+++++++++++++++++++++++++++++++++++++++++++
++ _Run_Bundle
+++++++++++++++++++++++++++++++++++++++++++
+++ Run Bundle
vfork_system("/system/lib/vtech/_Run_Bundle") returns 0
Desktop Manager: Initilaize OK
/system/bin/vtech/nand_mount.sh add
[   14.920000] vmtd_fops_open(): VMTD open 
[   14.920000] [INNOTAB_NAND] FUNC(innotab_nand_init) LINE(222) nand card not inserted!!
VMTD_IOC[   14.940000] vmtd_fops_release(): VMTD release 
_ADD_DEV error: dev[1]
Add device failure ...
umount: can't umount /vp_mnt/cart: Invalid argument
vfork_system("nand_mount.sh add") returns 1
19700101000012
>>> appswitch: pop and exec below app, 1 remain in stack.
>>> exec_argv[0] = "++NoHome"
>>> exec_argv[1] = "./clock.sh"
>>> exec_argv[2] = "-s"
app launch successfully: pid=295
wait_processes_terminate(295) -- start
desktopManager: detected NAND cart remove...
desktopManager: signalApp(3)
desktopManager: signalApp(): bundle_pid=294, title_pid=0, title_loc=-
vfork_system("nand_mount.sh remove")
/system/bin/vtech/nand_mount.sh remove
umount: can't umount /vp_mnt/cart: No such file or directory
/vp_mnt/cart: No such file or directory
rmdir: '/vp_mnt/cart': No such file or directory
[   16.610000] vmtd_fops_open(): VMTD open 
[   16.630000] innotab_nand_chip_del_mtd() - 672: InnoTab NAND MTD device not found: 1
VMTD_IOC[   16.630000] vmtd_fops_release(): VMTD release 
_DEL_MTD error: dev[1]
[   16.670000] vmtd_fops_open(): VMTD open 
[   16.690000] innotab_nand_chip_release() - 480: InnoTab NAND MTD device not found: 1
VMTD_IOC[   16.690000] vmtd_fops_release(): VMTD release 
_DEL_DEV error: dev[1]
vfork_system("nand_mount.sh remove") returns 255
Register Parser <Quick Time File Format>
Register Parser <.MP3 File Parser>
Register Parser <.WAV File Parser>
Register Parser <AMR/AMR-WB File Parser>
Register Parser <.APE File Parser>
Register Parser <.AAC File Parser>
setting Clock.
vfork_system("hwclock -w")
[   19.090000] [arch/arm/mach-gpl32900/rtc/gp_rtc.c:gp_rtcdrv_set_time] :
[   19.100000] ====>111 0 1 0 0 16
vfork_system("hwclock -w") returns 0
================= the last orientation is portrait ===================
Received terminate message!
fade in last step *************** mStepAlphaValue = 0
Loading Screen Exit....
fade in send message *************** mStepAlphaValue = -16

starting pid 263, tty '': '-/bin/sh'
/ # ls
audiomixer_socket  init.rc            sbin               tmp
bin                lib                showlogo           usr
dev                media              sys                var
etc                mnt                sysinit            vp_mnt
init               proc               sysinit.lua
init.project.rc    root               system
/ # cat /proc/mem/ # cat /proc/meminfo 
MemTotal:          31816 kB
MemFree:            3696 kB
Buffers:             704 kB
Cached:             8736 kB
SwapCached:            0 kB
Active:             8764 kB
Inactive:           8148 kB
Active(anon):       7184 kB
Inactive(anon):     6412 kB
Active(file):       1580 kB
Inactive(file):     1736 kB
Unevictable:        6120 kB
Mlocked:               0 kB
SwapTotal:             0 kB
SwapFree:              0 kB
Dirty:                 0 kB
Writeback:             0 kB
AnonPages:         13620 kB
Mapped:             2268 kB
Shmem:                 4 kB
Slab:               2272 kB
SReclaimable:        496 kB
SUnreclaim:         1776 kB
KernelStack:         352 kB
PageTables:          248 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:       15908 kB
Committed_AS:     112816 kB
VmallocTotal:     483328 kB
VmallocUsed:       30152 kB
VmallocChunk:     446460 kB
/ # cat /proc/cp/ # cat /proc/cpui/ # cat /proc/cpuinfo 
Processor	: ARMv6-compatible processor rev 7 (v6l)
BogoMIPS	: 359.62
Features	: swp half thumb fastmult vfp edsp java 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xb76
CPU revision	: 7

Hardware	: GPL32900
Revision	: 0000
Serial		: 0000000000000000
/ # busy/ # busybox 
BusyBox v1.17.3 (2011-06-03 10:40:24 CST) multi-call binary.
Copyright (C) 1998-2009 Erik Andersen, Rob Landley, Denys Vlasenko
and others. Licensed under GPLv2.
See source distribution for full notice.

Usage: busybox [function] [arguments]...
   or: function [arguments]...

	BusyBox is a multi-call binary that combines many common Unix
	utilities into a single executable.  Most people will create a
	link to busybox for each function they wish to use and BusyBox
	will act like whatever it was invoked as.

Currently defined functions:
	[, [[, arp, ash, awk, basename, blkid, bunzip2, bzcat, bzip2, cal, cat,
	catv, chattr, chgrp, chmod, chown, chroot, chrt, cksum, cmp, comm, cp,
	cpio, crond, crontab, cttyhack, cut, date, dd, depmod, devmem, df,
	dirname, dmesg, dnsdomainname, dos2unix, du, echo, ed, egrep, eject,
	env, expand, expr, false, fdisk, fgrep, find, flock, fold, free, fsck,
	fsync, ftpget, ftpput, grep, gunzip, gzip, halt, hd, head, hexdump,
	hostid, hostname, hwclock, id, ifconfig, ifdown, ifup, inetd, init,
	insmod, install, ip, ipaddr, iplink, iproute, iprule, iptunnel, kill,
	killall, killall5, length, ln, logname, losetup, ls, lsattr, lsmod,
	lsusb, lzop, lzopcat, md5sum, mdev, mesg, mkdir, mkdosfs, mke2fs,
	mkfifo, mkfs.ext2, mkfs.vfat, mknod, mkswap, mktemp, modinfo, modprobe,
	more, mount, mv, nc, netstat, nice, nohup, nslookup, od, pidof, ping,
	pkill, poweroff, printenv, printf, ps, pwd, rdate, readlink, realpath,
	reboot, renice, rm, rmdir, rmmod, route, run-parts, sed, seq, sh,
	sha1sum, sha256sum, sha512sum, sleep, sort, split, start-stop-daemon,
	stat, stty, sum, swapoff, swapon, switch_root, sync, sysctl, tac, tail,
	tar, tee, telnet, telnetd, test, time, top, touch, tr, traceroute,
	true, tty, udhcpc, umount, uname, unexpand, uniq, unix2dos, unlzop,
	unzip, uptime, usleep, uudecode, uuencode, vi, wc, wget, which, who,
	whoami, xargs, yes, zcat

/ # cat /prov/c/ver/ # cat /proc/version 
Linux version 2.6.32.94 (vicsiu@vicsiu-linux) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #55 PREEMPT Wed Nov 9 18:57:36 HKT 2011
/ # cd /lib
/lib # ls
image             libdl.so.2        libresample.so    libz.so
ld-linux.so.3     libgcc_s.so.1     librt.so.1        modules
libaudiomixer.so  libm.so.6         libstdc++.so.6
libc.so.6         libpthread.so.0   libts.so
/lib # 